Windows 10 Optimization And Tweak Guide For GAMING


Published 28.02.2019 в 12:00 | Guide rating: 129



Optimization For Windows 10

Optimization For Windows 10 By supermanz For more review's, guide's Visit My Page - http://steamcommunity.
com/groups/ComicCentre "An remember to +rep my profile if i helped! Or even add me! ~supermanz Once you have installed windows 10, updated it through the update system settings tab, install steam as normal.
STEP 1 Then apply the mouse an cheese fix located @ http://donewmouseaccel.
blogspot.
co.
uk/2010/03/markc-windows-7-mouse-acceleration-fix.
html Apply the windows 8.
1 correct registry file aka windows8.
1fix100DPI ETC This file fixes the windows precision for the mouse.
Then locate counterstrike global offensive folder - example "C:\Program Files (x86)\Steam\steamapps\common\Counter-Strike Global Offensive" STEP 2 Right click on the CSGO.
EXE > Go To > "compatibility > locate tick box *disable display scaling on high DPI Setting's" Tick this box and click ok , This setting fixes the lag behind the mouse to align best with the precision fix.
STEP 3 Load you're game as you would normally and enjoy the new mouse precision! Make Sure you're operating system is also up to date ~ ie latest windows 10 build Windows Registry Enhancment's "Right-click Start "Then select RUN - Type "Regedit" Then go to these location's And add These Command's.
Some can be found excisting but need you to modify by double clicking them , other's you need to add to them locations by right click "new- DWORD" Then adding that comman and it's number.
; Enable Congestion Control Provider(CTCP) on Windows 8.
1 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nsi\{eb004a03-9b1a-11d4-9123-0050047759bc}\0] "0200"=hex:00,00,00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,02,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,?\ 00,00,00,ff,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,?\ ff,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "1700"=hex:00,00,00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,02,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,?\ 00,00,00,ff,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,?\ ff,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ; Disable Hibernation Mode [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power] "HibernateEnabled"=dword:00000000 ; SSD Tweaks and fastboot [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters] "EnablePrefetcher"=dword:00000000 "EnableSuperfetch"=dword:00000000 "EnableBoottrace"=dword:00000000 ; Advanced Windows 7/8.
1 Power Manager [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\80e3c60e-bb94-4ad8-bbe0-0d3195efc663] "Attributes"=dword:00000002 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\2a737441-1930-4402-8d77-b2bebba308a3\d4e98f31-5ffe-4ce1-be31-1b38b384c009] "Attributes"=dword:00000002 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\9596FB26-9850-41fd-AC3E-F7C3C00AFD4B\03680956-93BC-4294-BBA6-4E0F09BB717F] "Attributes"=dword:00000002 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-a2a1-449c-9680-f91c70521c60] "Attributes"=dword:00000002 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4fbc-825e-521d069d2456] "Attributes"=dword:00000002 ; UDPIP Parameters [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters] "NegativeCacheTime"=dword:00000000 "NegativeSOACacheTime"=dword:00000000 "NetFailureCacheTime"=dword:00000000 "MaximumUdpPacketSize"=dword:00001300 ; TCPIP Parameters [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters] "DefaultTTL"=dword:00000040 "KeepAliveTime"=dword:006ddd00 "MaxUserPort"=dword:0000fffe "QualifyingDestinationThreshold"=dword:00000003 "SynAttackProtect"=dword:00000001 "Tcp1323Opts"=dword:00000001 "TcpCreateAndConnectTcbRateLimitDepth"=dword:00000000 "TcpMaxDataRetransmissions"=dword:00000005 ; Online Games - Tweak [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace\{D6277990-4C6A-11CF-8D87-00AA0060F5BF}] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSMQ\Parameters] "TCPNoDelay"=dword:0000001 "TcpNoDelay"=dword:0000001 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile] "NetworkThrottlingIndex"=dword:ffffffff "SystemResponsiveness"=dword:00000000 1.
Disable Windows Defender.
**Need windows 10 PRO** Run, gpedit.
msc then > Computer Configuration/Administrative Templates/Windows Components/Windows Defender> Turn off Windows Defender> Enabled This app takes up so much cpu cycles and causes a problem with safe questionable files downloaded.
If you're into heavy gaming and want the best performance, disable this.
If youre new to the internet and download content which may possibly have a virus then leave it on but it wont do any good.
Just get Kaspersky anti virus instead.
2.
Disable SmartScreen Filter Use Search and type smartscreen, and select change smartscreen settings (Desktop App).
Select Change windows smartscreen settings, then dont do anything.
3.
Keyboard Shift Sticky keys In Ease of Access in Control, select change how your keyboard works, Select Set up Sticky Keys> Untick "turn on sticky keys when SHIFT is pressed five times" Select Set up Filter Keys > untick "Turn on Filter Keys when right SHIFT is pressed for 8 seconds" 4.
Unsafe files which bother you to asking you're sure you want to open a file.
Search for internet explorer and select it (Desktop APP) Go in settings, and select the security settings and select the custom level.
Find "launching applications and unsafe files (not secure), tick Enable (not secure) 5.
Disable Prefetch and Superfetch for no random hitching in pc games.
Search for Services.
msc (or Services DESKTOP APP) and go into it and find Superfetch.
Startup type is Disabled and stop the service.
Search for regedit (run command) and go in, HKEY_LOCAL_MACHINE> SYSTEM>CurrentcontrolSet>Control>SessionManager>Memory Management>PrefetchParameters> Enable Prefetcher>0 Superfetch> 0 (it shouldnt be here if youre running a SSD) 6.
Runtime Brooker service takes up over 30% of your cpu cycles Settings -> System -> Notifications & actions and unselecting "Show me tips about Windows.
Settings > Update and Security > windows Update > Advanced Options > Choose how updates are delievered > OFF Fear 'Murica!! Never buy from UBISOFT or ACTIVISION.
Any game that supports drm or unoptimized on pc will never see a penny from me.
PC & Console Gamer 7.
Max Perfomance Power Plan Control Panel > Appearance and Personalization > Change screen saver > Change Power Settings> Select and tick high performance > change plan settings > change advanced power settings > select Change settings that are currently unavailable > Require a password on wakeup / NO > Hard Disk / Turn off hard disk after / 0 or NEVER (it will change to this after you put 0.
This one damages hdd and ssds when on due to garbage collection being screwed for ssd and the hdd excessive wear when resuming when turned off.
8.
Disable System Restore Windows 10 Pro NEEDED Cinque TerreCinque TerreCinque TerreCinque Terre

Windows 10 Guide For Gaming Video

This is the Video for this Guide by myself ~supermanZ :superman: http://steamcommunity.
com/sharedfiles/filedetails/?id=1263952682 This Video contain's 75% of this Guide.

Join The Pc Master Race?

Thinking of joining the pc master race? Tierd of them android device's and console's? Well here's all you need to know about what part's to buy and where to install them in my personal guide on how to build you're very own PC! PART1 - http://steamcommunity.
com/sharedfiles/filedetails/?id=1262922087 PART2 - http://steamcommunity.
com/sharedfiles/filedetails/?id=1262922085

Netcode Enhancement

Netcode Enhancement - www.
speedguide.
net > download's > TCP OPTIMIZER *V4.
0 WIN10* Run as admin and apply optimal settings , reboot PC , then load the program again and Disable "R.
segment Coalescing" This will Then remove router packet frame buffer delay from you're wifi or eternet switch" Enjoy the extra packet's , speed increse in internet surfing and of course better hit registry ingame due to more packets being accepted and passed without heavy buffer's causing packet lose.
Some site's also provide a ndis lightswitch profiler for the actual windows stack protocol example - http://www.
gigabyte.
com/MicroSite/300/lan-optimizer.
html Realtek Internet Adapter Drivers[www.
realtek.
com.
tw] Realtek Lan Optimizer Version 1.
0.
2.
7 Lan Optimizer Realtek [download.
gigabyte.
eu] Version 1.
0.
2.
6[download.
gigabyte.
eu] QOS/TOS Optimizing For Network's At Home QOS/TOS Setup[www.
howtogeek.
com] Windows 10 Qos Setting Up Windows + R Type "GPEDIT.
MSC" Then Under Sections ON Computer Configuration + User Configuration Go To Tab's Window's Settings.
You will now see Policy Based Qos Right click Policy Based Qos- Advanced Qos Setting's.
This section is only available on the Computer configuration.
Now you will see two tab's called Inbound TCP Traffic And DSCP Marking Override.
Select the first tab , tick the box called specify the inbound TCP throughput Level and select you're choice , for gaming and internet priority i usally would select Maximum level 3.
Select tab 2 DSCP marking if you're using a virtual LAn to mark packets.
Then ON Both section's Computer Configuration + User Configuration Right click Policy-Based Qos and Create New Policy.
Input a Name for example Policy Name "Doom" Specify DSCP Value "untick if not on a virtual Lan" Specify Outbound Throttle Rate Type whatever you would like Try to keep this high for example cat4 enthernet cable "100 mbps" Cat5e/cat6 cable "1000 mbps" Wire-less "maximum speed of you're adapter" B/g Would be 54mbps, N would be 150 to 300mbps, AC/A would be 300 to 800mbps" Next Step Setup An application Or the whole Qos to use all applications.
All applications select that and that is that step done , or input an Application for example C:\Program Files (x86)\Steam\steamapps\common\DOOM\Doomx64.
exe Windows Firewall Configuring :- Go To "Control Panel\All Control Panel Items\Windows Firewall" Click Advanced on the left Pane/Panel Click on Inbound Rule's Find what ever game or program you like, Double click on it for example Double click on Steam, Go to the advanced tab, On this tab you will see a section called Edge traversal, Select Allow edge traversal, this will allow more packets through and the more you receive the more data you can require, ie packets which also send data like when you shoot someone in a game on multiplayer.
! Do this for other applications you want like streaming service's etc.
Then hit ok For Steam Game's Like CSGO You can also add rule's to keep pings low when you play online Matchmaking Server Picker[gamebanana.
com] Download Run as Admin and Select the servers you want, then hit apply.
Enjoy you're low ping time's ingame.
WLAN Optimizer (aka wifi tweaking) wifi optimizer[www.
martin-majowski.
de] Internet Accelerator - internet accelerator[www.
pointstone.
com] "Internet Accelerator improves various configuration settings that directly affect your network and Internet connection speed.
When Windows is installed, these settings are in most cases not optimized for the Internet or for your particular network connection and actually prevent you from reaching maximum download and upload speeds.
Previously, there was no simple way to edit these settings manually without dangerously exploring and modifying the Windows registry by hand, however Internet Accelerator now makes it easy for anyone to reach maximum performance with a few clicks.
" Cinque TerreCinque TerreCinque TerreCinque Terre

Optimization Of System OS Background Task's

CPU Cycle Boosting - Autorun's- https://technet.
microsoft.
com/en-us/sysinternals/bb963902.
aspx This utility, which has the most comprehensive knowledge of auto-starting locations of any startup monitor, shows you what programs are configured to run during system bootup or login, and when you start various built-in Windows applications like Internet Explorer, Explorer and media players.
These programs and drivers include ones in your startup folder, Run, RunOnce, and other Registry keys.
Autoruns reports Explorer shell extensions, toolbars, browser helper objects, Winlogon notifications, auto-start services, and much more.
Autoruns goes way beyond other autostart utilities.
CPU Multi-Core Enhancement - CoderBag's unpark core's tool- http://www.
coderbag.
com/programming-c/disable-cpu-core-parking-utility If you are an owner of a new multicore Intel CPU for example Intel core I7 and Windows 7 or Windows Server 2008 OS, you already might notice that some of the cores in your resource monitor are marked as parked.
This is a new feature of windows 7/2008 operating system that is made to balance energy consumption by your CPU.
So let’s say if you are performing some tasks that do not consume a lot of CPU power, all the cores that are parked will remain in that state.
However, if you are running something that requires a lot of CPU power, all the cores, which were previously parked, will be placed in the active state (unparked) to perform the task.
And after it’s done, they will be parked again.
This utility will allow you to easily enable or disable core parking for your CPU.
ClockBlocker - clockblocker[www.
guru3d.
com] Cinque TerreCinque TerreCinque TerreCinque Terre

Window's 10 Host's.file editing

First, download the Take Ownership tweak and enable it.
Located here -Take Ownership[www.
howtogeek.
com] Then, head to the Hosts File by going through C:\Windows\System32\Drivers\Etc, take ownership of the hosts file, and add the following IPs into it: A Good host'sfile to add to you're excisting host file on windows 10 - HOSTFILE[www.
angelfire.
com] Cinque TerreCinque Terre

Window's 10 PAGEFILE Optimization

Type ‘regedit’ in the search box, and hit Enter to open Registry Editor Reply with Yes if prompted In the left pane of registry editor, explore Computer node to view registry keys Click to expand HKEY_LOCAL_MACHINE In the dropped down list, find and click to expand SYSTEM key In the disclosed list, locate and expand CurrentControlSet Subsequently, locate and inflate Control key Discover and penetrate the key named Session Manager Finally, select and stay on Memory Management key Windows 8 Registry Tweaks to Enhance System Memory Management Performance While, Memory Management key being highlighted, you can see some values in the right panel of Registry Editor.
Through the subsequent guidelines, you will be enabled to make changes in these values to manage your System Memory with an optimistic approach.
Value 1 ClearPageFileAtShutdown Page file is the reserved memory on hard drive used as an extension of RAM.
This memory contains data that was not recently used by RAM, and transferred to hard disk.
It may constitute of the information stored by third party applications.
Along with certain personal data, it may include the data like Usernames, Passwords, Credit Card numbers, and other security PINs.
Page file can be cleared on shutdown, manually, as Windows does not do so.
To clear page file at shutdown: Double click this value to Modify In the Value data field, change the value from 0 to 1 Click OK to save your changes Value 2 DisablePagingExecutive DisablePagingExecutive permitted systems, load kernel directly to the RAM, rather than Virtual memory, which is comparatively slower.
DisablePagingExecutive, when enabled, is also helpful in debugging drivers.
A 64-bit Windows may have this feature enabled, by default.
32-bit users can manually enable it by Double click this value to Modify In the Value data field, change the value from 0 to 1 Click OK to save your changes Value 3 LargeSystemCache An activated LargeSystemCache increases the size of system cache.
It usually heightens the system performance, but lessens the physical memory space for other applications and services.
This value generally facilitates the servers, whereas, workstations are suggested to shut it down through following steps Double click this value to Modify In the Value data field, change the value from 1 to 0 Click OK to save your changes Value 4 NonPagedPoolSize / PagedPoolSize Paged pool is a portion of memory that stores the pages with intention to move them to the page file, while non-paged pool is a contrariwise concept that stores the pages but never moves them to page file.
Enabling both the values, require postulating the exact size in bytes.
It is suitable to disable these values to put the system in charge of calculating prime value, which adjusts dynamically.
The value for Paged Pool size may range between 1MB to 512MB.
However, it is recommended to set 192MB.
Double click this value to Modify Change the Base from Hexadecimal to Decimal In the filed next to Value data, replace 0 with 192 (making it 192MB) Click OK to save your changes Value 5 NonPagedPoolQuota / PagedPoolQuota By enabling these values, you are aimed at limiting the memory resources to each single process.
If in case, the process tries to exceed the allocated quota, it would fail.
Therefore, it is recommended to leave it disabled or disable it (if enabled).
Both the values are enabled by specifying the size of memory, allocated to non-paged pool and paged pool, respectively.
This size ranges between 1MB and 128MB, and is assigned through Value data.
On the other hand, disabling these values authorize the system to calculate an optimal value for both the entries based on current physical memory, and auto-adjusts in case of change in memory size.
To disable these values Double click this value to Modify Make sure the Value data is 0, to make it auto-managed by system Click OK to save your changes Value 6 PhysicalAddressExtension Physical Address Extension, generally known as PAE, is the technology that enables 32-bit operating system to access more than 4GB memory, up to 64GB or 128GB, depending on the physical address size of processor.
A 64-bit system has the ability to access more than 4GB RAM, and does not necessitate PAE.
If you have a 32-bit Windows with sufficient RAM, you need to enable this value in the Registry Editor.
Double click this value to Modify In the Value data field, change the value from 0 to 1 Click OK to save your changes Value 7 SessionPoolSize The registry entry noted above deals with the memory used for the allocation of video drivers.
If the size of Session Pool is pre-defined, it limits the active session from using excessive memory, and if it does, the session crashes, with a stop message.
To avoid such inconvenience you are suggested to elevate the value of SessionPoolSize.
Double click this value to Modify Change the Base, from Hexadecimal to Decimal In the Value data field, change the value to 48 (making it 48MB) Click OK to save your changes Value 8 SessionViewSize SessionViewSize is the key that is related to the desktop heaps within the active session on a server or workstation.
It allocates to memory to interactive Window Station.
Interactive Window Station contains group of desktop objects like Windows and menus.
It has the attitude similar to SessionPoolSize, as it freezes the process, when trying to excess the allocated memory.
Double click this value to Modify Change the Base, from Hexadecimal to Decimal In the Value data field, change the value to 96 (making it 96MB) Click OK to save your changes Value 9 SystemPages SystemPages refer to the number of page table entries (PTE), reserved to store the mapping between virtual addresses and physical addresses.
This mapping is performed by dividing RAM into fixed-sized page frames.
Information is stored and mapped in these page frames.
If value of SystemPages has to be other than 0, it must be allocated with the maximum value, 0xFFFFFFFF.
However, it is recommended to leave it system managed, as system adjusts and calculates the optimum value for this entry, if the Value data is left 0.
Double click this value to Modify In the Value data, make sure the text field indicates 0.
Click OK to save your changes Value 10 PoolUsageMaximum This value identifies the allowed maximum usage of paged pool.
The value data of this entry signifies the percentage specification of maximum pool usage.
This value may not exist in the registry, by default.
In such scenario, create a New DWORD Value, and name it exactly as PoolUsageMaximum.
Assigning a value data to this key identifies the range to start the Trimming process.
Double click this newly created value to Modify In the Value data field, put ‘60’ to allow 60% usage of total paged pool before trimming starts Click OK to save your changes Cinque Terre

Window's 10 SSD Optimization

Recommended software - OCZ SSD Utility- SSD Utility is complementary management software designed to help you maintain, monitor and tune your OCZ SSD! ocz ssd guru[ocz.
com] Older OCZ SSD's Please use OCZ Toolbox OCZ ssd Toolbox[www.
techspot.
com] Samsung Magician - Samsung ssd tuning software[www.
samsung.
com] While Data Migration is designed as a simple solution for users who need to upgrade from their existing drive to their new Samsung SSD, the Magician software is a management suite for optimizing, tuning, and keeping tabs on the health of the SSD.
KINGSTON SSD Toolbox -Kingston ssd toolbox[www.
kingston.
com] INTEL SSD Toolbox - intel ssd toolbox[www.
intel.
co.
uk] Cinque TerreCinque TerreCinque TerreCinque TerreCinque Terre

Window's 10 SSD Optimization 2

SSD's using the intel sata3 controller interface "not marvel" will experience stutter or lack of bandwith issue's.
This is an incompatibility issue with the LPM (Link Power Management) feature of Intel SATA controllers.
LPM is a power saving feature.
Considering the prevalence of Intel SATA controllers, I’m really surprised that Crucial/Intel/Samsung didn’t catch this before they shipped their drives, or at least didn’t have a firmware fix available shortly after shipping.
To fix the issue, LPM needs to be disabled.
It can be disabled with a registry change: Open up notepad and copy the following into it: Windows Registry Editor Version 5.
00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port0] "LPM"=dword:00000000 "LPMDSTATE"=dword:00000000 "DIPM"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port1] "LPM"=dword:00000000 "LPMDSTATE"=dword:00000000 "DIPM"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port2] "LPM"=dword:00000000 "LPMDSTATE"=dword:00000000 "DIPM"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port3] "LPM"=dword:00000000 "LPMDSTATE"=dword:00000000 "DIPM"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port4] "LPM"=dword:00000000 "LPMDSTATE"=dword:00000000 "DIPM"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port5] "LPM"=dword:00000000 "LPMDSTATE"=dword:00000000 "DIPM"=dword:00000000 Save the file as “fixssd.
reg”.
Double click the saved file.
You will get a User Account Control prompt asking if you want “Registry Editor” to make changes to your computer.
Click “Yes”.

Window's 10 Game mode feature set

GAME MODE Windows 10 Development Team - “Our goal is to make Windows 10 the best Windows ever for gaming,” says Mike Ybarra on the Xbox Wire blog.
“With the Creators Update, we’re introducing a new feature called Game Mode.
Windows Insiders will start seeing some of the visual elements for Game Mode this week, with the feature being fully operational in builds shortly thereafter.
Our vision is for Game Mode to optimize your Windows 10 PC for increased performance in gaming.
” The way Microsoft intends Game Mode to work is by prioritising hardware resources (processor and graphics silicon) for a particular game when you’ve got it running in the foreground, minimising your PC's call on your hardware for background processes.
For the GPU it is aiming to allow a Game Mode enabled title to have greater access to the graphics card’s processing cycles.
In theory that should mean background processes won’t suddenly demand GPU resources for itself, making your gameworld periodically glitch out and your frame rates tank.
On the CPU side Microsoft suggest Game Mode will be apportioning a dedicated amount of your chip’s thread count to the selected game with a reserve held over for background processes.
These background processes won’t then be able to dig into the penned off portion of the CPU a Game Mode title is using, which should bring a greater level of consistency to your gaming experience.
Microsoft also say it’s an OS level feature and won’t discriminate between games running on the Universal Windows Platform (UWP), Win32 games, DirectX 12, DirectX 11 or any other API.
That doesn’t mean that it will work equally well for all games - Microsoft says that while it will work on any PC game UWP titles might see a higher performance boost than Win32.
To find this new feature set , just go to the window's 10 settings tab on the latest build "fast or slow ring!" And Turn it on.
Cinque TerreCinque Terre

Window's 10 True Play Feature

Window's 10 True Play Feature Microsoft quietly added an anti-cheat game feature to Windows 10 called True Play, This can be turned on to make sure that game's are covered by a Anti-Cheat System.
Please Note all "Cheater's" that don't turn this feature on still are not secured as Window's 10 Management Team will scan there iso window's 10 image to log for any unkown filetype's sending them to there research department, relying this information within there databanks for game's and Ban the User On window's 10 for All window's covered game's and xbox 360/ Xbox one/ Window's Phone user's.
Cinque Terre

Window's 10 Webcam Freezing Fix

How to fix the webcam freezing issue on Windows 10 If your PC webcam keeps freezing up, even when trying to make a Skype video call, use this guide to get around this issue after installing the Windows 10.
Use the Windows key + R keyboard shortcut to open the Run command.
Type regedit, and click OK to open the Windows registry.
Browse the following path: HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows Media Foundation\Platform Right-click on the right side, select New, and click DWORD (32-bit) Value.
Name the new key "EnableFrameServerMode" Click OK.
Double-click the newly created key and make sure it set to 0.
Other webcam fix for older model's- Xsplit Broadcaster/Gamecaster - Load you're camera/webcam then go to setting's for it on xsplit , first tab - change sharpness to 0 2nd tab - change the ambient brightness from auto to the last step of it being dark before light for some it's 4 , other's it's 6.
Then go back to the first tab Change brightness in this tab to lighten the scene to compensate for the ambient lighting being on low.
SAVE You will notice now motion on the camera in Xsplit is far smoother! Cinque Terre

Window's 10 Memory Standby List Game Stutter Fix

Games need RAM to run.
Some games need a littler RAM, others need a lot.
When you play games on Windows 10, your RAM isn’t wholly dedicated to the game.
Other processes, and maybe even some apps, continue to use it when they need to.
Windows 10 has a game mode which, in theory, is supposed to free up as many system resources as it can for a game however, most people find it makes little to no difference with some exceptions.
One way to run games more smoothly is by clearing the memory standby list.
If you’re playing a game, and it starts stuttering after a while, clearing the memory standby list is a good idea but if you don’t keep it clean, the stuttering will return.
Intelligent standby list cleaner is a free app that keeps the standby memory list under 1024MB i.
e.
, 1GB.
Intelligent standby list cleaner[www.
wagnardsoft.
com]

Window's 10 GAMEBOOSTHD By R1ch

GameBoostHD Dynamically adjust process priority of background applications to maximize game performance About GameBoostHD is a tiny application that will watch for various game launches.
When a game is detected, GameBoostHD will lower the priority of common background apps that often use CPU.
This includes things like game launchers (Battle.
Net, Steam, etc) and web browsers (Chrome, Firefox, Opera, IE).
The system power profile will also be set to "High Performance" while a game is running.
This will hopefully improve performance of the game (increased FPS and fewer stutters) as it won't be competing for timeslices with other processes.
The idea behind this came about when I was playing Overwatch and noticed the Battle.
net launcher was using up to 12% of my CPU due to the animated GIFs and javascript and whatever else it was running.
Using GameBoostHD won't reduce the CPU usage percent - it only alters the scheduling priority.
For example, after running GameBoostHD, the Battle.
net launcher will never be allowed to "steal" CPU attention from Overwatch, but if there is spare CPU power it is still allowed to use it.
Usage GameBoostHD has no installer or user interface.
Simply run the .
exe file and the program will be running.
It will work continuously until a shutdown / reboot.
It's written in C / Win32 API so it's extremely lightweight and will use minimal resources running in the background.
If you want it to run when you start your PC (recommended), make a shortcut to it in your Start / Programs / Startup folder or set up a scheduled task.
Gameboosthd download[r1ch.
net]

Window's 10 Driver updating for gaming performance and multi-threading enhancing.

Snappy driver install LITE, find's all the drivers on you're pc or needing "fresh install" and supply's you with a list of optimal and highly tested performance driver's as a replacement or upgrade.
snappy driver installer[sdi-tool.
org] Game Booster - A simple utility but you have to pay for more driver unlock's.
Id suggest this to most gamer's as it's easy to use, but if youre refresh installing , barebone's , hardcore gamer, streamer, overclocker or benchmarker id suggest using snappy driver installer as it's fast lightweight "lite version" and is FREE! IOBITS GAMEBOOSTER[www.
iobit.
com]

Remove shortcut arrow overlay in Windows 10

Shortcuts in Windows have an arrow overlaid on top of the icon to indicate that they are links, to files, exe's, app's , game's or shortcut's.
If you are not happy to see the shortcut overlay icon, here is how you can disable it.
Download the ZIP archive which contains an empty icon.
It will be used instead of the blue arrow overlay icon.
Remove Arrow [winaero.
com] In the archive, you will also find ready-to-use Registry files so you can avoid manual Registry editing and save your time.
Extract folder and place blackicon in this section "C:\Windows\blank.
ico" Then open the extracted folder again and double click on w10-remove-compress-overlay.
reg Then log out or restart and thats it! "Keep the undo.
reg file for when you are not happy and want a arrow back on youre icon's.
!"

Advanced Windows 10 Optimization "Spying Eliminated and 0 connection's stealing you're data!"

How to fix Windows 10 privacy? Zero connections, being offline to MS.
First when installing windows or after that follow this guide to disable all the spoofing from Microsoft.
Update your hosts file (its the minimum), good list is provided in the hostfile section of this guide.
From windows taskbar run Powershell and type: Set-ItemProperty -Path "HKLM:\Software\Policies\Microsoft\Windows\DataCollection" -Name "AllowTelemetry" -Type DWord -Value 0 Disable keylogger from Windows in cmd with admin rights.
sc stop DiagTrack sc stop dmwappushservice sc delete DiagTrack sc delete dmwappushservice echo „“ > C:\ProgramData\Microsoft\Diagnosis\ETLLogs\AutoLogger\AutoLogger-Diagtrack-Listener.
etl Follow this guide about microsoft diagnosis and tracking services and block them, find more on the web.
Don’t forget to delete automatic scheduled tasks Disable data collection with this guide.
Edit registry with regedit from windows.
Remove one drive if you havent already Remove all metro default apps from your OS Beware of the dns resolving in Windows You should also look into msconfig (from taskbar) and block programs that you do not want on startup.
Be sure to restrict your Internet Explorer and Edge browser to be completely not working and blocked in their settings just prohibit everything.
Watch your network activity Now track your network activity use this app called Fiddler.
In settings allow https tracking and allow decrypting.
First Time Setup Spoiler Do not use Express Settings.
Hit Customize, and make sure everything is turned off.
It's strongly recommended that you use a local account with Windows 10.
Settings App Spoiler Head to Start > Settings > Privacy, and disable everything, unless there are some things you really need.
While within the Privacy page, go to Feedback, select Never in the first box, and Basic in the second box.
Head to Settings > Update and Security > Advanced Options > Choose how updates are delivered, and turn the first switch off.
Disable Cortana by clicking the Search bar/icon.
(Optional) Disable web search in Search by going to Settings, and turning off Search online and include web results.
Change the name of your PC by going to Start (or hitting the Windows key), typing About PC, and clicking Rename PC.
Scheduled Tasks Spoiler Open up the Command Prompt by launching cmd as an administrator, and enter the following: sc delete DiagTracksc sc delete dmwappushserviceecho echo "" > C:\ProgramData\Microsoft\Diagnosis\ETLLogs\AutoLogger\AutoLogger-Diagtrack-Listener.
etl echo y|cacls C:\ProgramData\Microsoft\Diagnosis\ETLLogs\AutoLogger\AutoLogger-Diagtrack-Listener.
etl /d SYSTEM Here's a list of tasks to delete courtesy of Technie007.
You need to go into Task Scheduler to delete them.
Microsoft -> Windows -> Application Experience -> Microsoft Compatibility Appraiser Microsoft -> Windows -> Application Experience -> ProgramDataUpdater Microsoft -> Windows -> Autochk -> Proxy Microsoft -> Windows -> Customer Experience Improvement Program -> Consolidator Microsoft -> Windows -> Customer Experience Improvement Program -> KernelCeipTask Microsoft -> Windows -> Customer Experience Improvement Program -> UsbCeip Microsoft -> Windows -> DiskDiagnostic -> Microsoft-Windows-DiskDiagnosticDataCollector Microsoft -> Windows -> PI -> Sqm-Tasks Microsoft -> Windows -> Power Efficiency Diagnostics -> AnalyzeSystem Microsoft -> Windows -> Windows Error Reporting -> QueueReporting Or use this command script to do everything automatically.
You will have to accept a UAC prompt if you have it turned on because it auto elevates itself.
Group Policy Editor Spoiler How to get the Group Policy Editor on Home version: https://www.
itechtics.
com/enable-gpedit-windows-10-home/ Open up the Group Policy Editor by launching gpedit.
msc as an administrator and make the following changes: Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds.
Double click Telemetry, hit Enabled, set the value to 0 and click apply.
It's counter-intuitive, I know, but that is actual way to do it.
Proof NOTE: This only works in the Enterprise edition, but the final step provides a decent enough workaround for Pro users.
Computer Configuration > Administrative Templates > Windows Components > OneDrive, double click Prevent the usage of OneDrive for file storage, hit Enabled, then apply.
Computer Configuration > Administrative Templates > Windows Components > Windows Defender, double click Turn Off Windows Defender, hit Enabled, then apply.
Registry Editor Spoiler NOTE: Taking ownership of the keys may be required.
This tool will allow you to do that.
Value Changes Open up the Registry Editor by launching regedit as an administrator.
Go through and make the following changes: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\DataCollection, select AllowTelemetry, change its value to 0, then apply.
If any of the referenced keys don't exist then create them with the above values.
Deletions Open up the Registry Editor by launching regedit as an administrator.
Go through and delete the following keys and/or values: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\AutoLogger\AutoLogger-Diagtrack-Listener HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\AutoLogger\SQMLogger Cinque TerreCinque Terre

Advanced Window's 10 Optimization 2

How to disable the Diagnostics Tracking Service diagnostic tracking service The service does not appear to be a critical system service that needs to run at all.
Considering that it was just added, it is fair to say that disabling it may not affect the underlying system or at the very most only marginally.
The service is not protected in any way which means that you can disable it using the Services manager.
Tap on the Windows-key, type services and hit enter.
Locate the service Diagnostics Tracking Service and double-click on it, Activate the startup type menu and select disabled from it.
This disables the services' autostart.
Click the stop button afterwards to stop the running process.
This stops the service for the current session.
disable diagnostics tracking service The service won't start with Windows anymore and won't run in the session you have disabled it.
Destroy Window's 10 spying with DWSLite.
DWSlite[github.
com] SETTING GAMES TO HIGHER PRIORITY FOR CPU PERFORMANCE ON CYCLES example here is for quake champions , but you can locate youre game here- "[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\" set high priority - Windows Registry Editor Version 5.
00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options/QuakeChampions.
exe/PerfOptions] "CpuPriorityClass"=dword:00000003 remove the modification - Windows Registry Editor Version 5.
00 [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\QuakeChampions.
exe] Cinque TerreCinque Terre